Kitchen hot and cold faucet installation

February 25, 2019

With the gradual improvement of people's quality of life, the installation of hot and cold faucets in the kitchen has become a must, especially in the colder north, installing a hot and cold water faucet is especially necessary for frequent cooking friends. In fact, having a faucet that can produce hot water is an important issue, and how much happiness can be raised! So, how to install the kitchen hot and cold faucet? Let's take a look with Xiaobian.

Kitchen hot and cold faucet installation

A single hole kitchen faucet device

Because kitchen faucets are used more frequently, they are required to be stable. In addition to being moved around, it is easy to loosen, so the locknut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future.

Single cold on the stainless steel basin as long as fixed and then connected to the two 4 teeth of a hose connected to an angle valve on the head under the faucet on the line, hot and cold like just one more water.

There are several types of taps: single cold, mixed hot and cold. The single cold is very simple, directly on the wall of the pipe head, if it is mixed hot and cold, it should be clear that the wall of hot and cold water pipes, usually left hot right cold.

Second, the installation of single hole kitchen faucet

The requirement is stable, because the kitchen sink mixers is used frequently, and it is easy to loosen and move it. Therefore, the lock nut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future. Ready to install tools, check whether the complete set of accessories before installation, common faucet parts are: hose, rubber gasket, shower, go to water, kidnappers, decorative caps and so on.

Third, accessories preparation

1, a full set of fixed bolts and fixed copper sheets and gaskets.

2, a full set of basin to pull the water heater.

3, two inlet pipes.

Then remove the faucet, pull the handle up and down, feel the open and close, and feel light and smooth, with a gentle and even sense of blockiness. The next step is to check that the plating surface is bright, free of bubbles, spots, and scratches.

The above about the Kitchen Mixer Taps installation are briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.

Brass Kitchen Taps Brass Kitchen Faucet

문의하기

Author:

Ms. linly

이메일:

464021406@qq.com

Phone/WhatsApp:

+8613751081118